The residual current circuit breaker is applicable to electrical circuits with a rated voltage of 230/400V AC, a frequency of 50/60Hz and a rated current of up to 63A.
With the diversification of energy use and equipment, the interactive use of alternating and direct current, and products with many different waveform signals, we need higher-level residual current protection circuit breakers to protect our personal safety and avoid the danger of electric shock.
Type B RCDs, in addition to normal alternating current, can detect high-frequency AC and pure DC earth leakage currents.
Reducing the risk of fire and/or electrocution by automatically disconnecting the power supply relies on selecting the right type of RCCB.
The RCCB offers mutual protection to the operator's body in conditions where exposed live parts must be connected to a suitable grounding post. The RCCB also offers protection against the fire hazard caused by ground fault current due to a malfunction of the overcurrent protection device.
| Model | Electromagnetic type |
| Residual current characteristic: | Type B |
| No. of poles: | 2P |
| Rated manufacturing and breaking capacity | 630A |
| Rated current(A) | 16-63A |
| Rated voltage | 230V / 400V |
| Rated frequency | 50 / 60Hz |
| Rated residual operating current |△(A) : |
| .03, 0.1, 0.3 |
| Rated residual non-operating current |△ no : |
| .5|△n |
| Rated conditional short-circuit current inc: |
| Rated conditional residual short-circuit current |△c: |
| Tripping duration: | Instantaneous tripping ≤0.1s |
| Residual tripping current range: |
| .5||△n~|△n |
| Electromechanical endurance | ≥5000 XNUMX cycles |
| Connection capacity: | Rigid conductor 25mm²; |
| Connection terminal | screw terminal Column terminal with clamp |
| Tightening torque |
| .5 Nm |
| Installation | On 35 mm symmetrical DIN rail Panel mounting |
check_circle
check_circle
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent